For sale Mercedes AROCS 2640 with Putzmeister BSF 38-5 16H LS body. The vehicle is meticulously maintained and has been used since new by one experienced operator. The chassis is serviced only at the Mercedes Dealership, while the pump at the Putzmeister Dealership. The vehicle is like new, available immediately in a very rich and unusual equipment specification, including:

The most powerful pumping unit with an LS type piston (low stroke, the most expensive to buy, the cheapest to use) - 16 H LS
Slower and more economical
160 m³/h / 85 bar
26 strokes / 250 mm piston
Long-life piston

EPS – Ergonic® Pump System
It takes control of the machine to optimize its operation - this system, by collecting signals from many sensors that are installed in the device, is able to properly adjust the operation of the pumping unit, so that, for example, it is not overloaded when the hydraulic oil is too cold, or the pumping parameters are selected in such a way, so that the flow of the mixture is as smooth as possible.

EOC – Ergonic® Output Control
Sets the optimum engine speed for quiet, economical and efficient operation. This system, in turn, is responsible for the fuel consumption of our device, as well as for minimizing environmental pollution. It allows the engine speed to be increased only when necessary, and when pumping or the boom is not operated, the engine speed immediately drops to idle.

Ergonic® FFS
The ergonomic boom control system continuously monitors the position of the boom, presenting data on the display in real time. This is a very useful solution, thanks to which we can immediately find out in what position the arms of our machine are, especially when working with only partially unfolded support legs, we can see on the display how far we can still move or extend the boom.

ERGONIC 2.0 - modern radio control:
The control device itself, i.e. the commonly known "pilot" of the concrete pump, has definitely evolved. In the latest release, it is 30% lighter than the previous model, can be used as an independent cable control, has separate switches for machine activation and horn. In addition, it is equipped with a large, readable multi-color display that informs the operator about the current status of the machine and its components, and it is possible to run all functions of the device through an intuitive operating system. For example, machine cleaning functions through the appropriate menu, or settings of the central lubrication system. In addition, the radio has a built-in flashlight, which will be appreciated by operators who often roam the construction site after dark.

EBC - Ergonic® Boom Control
advanced boom control system
This system is very much liked and appreciated by the operators - it enables semi-automatic folding and unfolding of the boom by means of the "assistant of unfolding and working" enables the operation of the entire boom with only one manipulator, it is the only such solution on the market! In addition, you can individually adjust the speeds of individual arms, set the maximum height and width working points of the reach, or use the "swinging" leveling function of the boom. The system has an excellent impact on the work culture and comfort of operating the concrete pump mast.

ESC - Ergonic Setup Control
A huge number of possibilities to safely set up the machine depending on the amount of space on the construction site

This system was introduced by Putzmeister after the recent changes to the EN 12001 standard, the manufacturer's assumption was to adapt its products to the applicable regulations, but also to add functions that will facilitate and increase the safety of machine operation. Thanks to this system, dozens of options for supporting the machine are possible, which makes it possible to work in hard-to-reach places, with the support legs not fully extended. The machine is monitored all the time, and if, for example, a leg starts to settle in the ground - the operator is immediately informed about it, and the possibility of moving the boom is blocked, which would expose the machine to tipping over! Many machine models are equipped with a stepless or multi-stage support extension system, which can, for example, ensure the operation of a machine with the first arm locked vertically and the support legs are not extended in it.

All the above-mentioned functions are available in the latest models of machines - truck concrete pumps, mixer pumps, as well as in stationary booms.

The use of these functions is primarily to follow the increase in the safety of work with the device on the construction site, and to increase the convenience and economy of use. It should also be noted that the above-mentioned solutions are the only solutions of this type available on the concrete pump market.