Samag MFZ 2-3 apstrādes centrs

This 3-axis SAMAG MFZ 2-3 was manufactured in 2008. It features a working area of 300x500x450 mm, rapid traverse speeds up to 60 m/min, and a tool magazine with 90 positions. The spindle supports a speed range of 50 to 16,000 rpm with a drive power of 28 kW. Ideal for high precision and efficiency in machining tasks. Contact us for more information about this machine.
Machine Benefits
Technical Machine Benefits
Required installation space (length x width): approx. 5950 mm x 6700 mm
Weight (kg) including coolant system and chip conveyor: approx. 25000 kg
Operating voltage: 400 v 3 n~ 50 hz
Control/valve voltage: 24 v dc
Machine power rating: approx. 82 kva
Back-up fuse before main switch: 3 x 160 a
Connector cross-section: 70 mm²
Extra Information
Ott Tool Clamping System
Torque (S1/S6): 63/83 Nm
Nominal Speed: 4200 rpm
Spindle Bearing Diameter: 70 mm
Spindle Lubrication: Lifetime grease lubrication
1 Horizontal 180° swivel support (W-axis)
Faceplate Diameter (NC drive/counter bearing): 500/345 mm
Permissible Tangential Torque: 15000 Nm
Positioning Accuracy: ±3 angular seconds
Swivel Time (0°/180°): Approx. 6 s
Number of Horizontal 360° Workpiece Support Axes
Positioning via Face Gearing: 120 x 3°
Positioning Accuracy (120 x 3°): ±3 arc seconds
Max. Transport Load per A-axis: Approx. 600 kg
Permissible Tangential Torque: 5000 Nm
Working Area (interference circle x length): Ø700 x 940 (1036) mm
Approaching Intermediate Positions Outside the 3° Pitch: Possible (NC position control)
Positioning Accuracy: ±25 angular seconds
Permissible Tangential Torque: 1000 Nm
Tool Magazine: 90 tool positions (3 x 30)
Max. Tool Diameter with Free Adjacent Positions: 160 mm
Cut-to-Cut Time (within 1 cartridge): Approx. 5.2 s

Media

Hydraulic Unit Capacity: 160 l
Max. Operating Pressure: 160 bar
Max. Flow Rate: 12 l/min
Pneumatic System: Required Compressed Air Connection, Required Air Consumption (short-term) 6 ± 0.5 bar
Factory Air Quality: Class 545 according to DIN-ISO 8573-1
Coolant System: Knoll coolant system with coolant cooling
Coolant Tank Capacity: Max. 1400 l
Separate Machine Bed Flushing: 160 l/min at 2.6 bar
External Tool Cooling and Various Flushing Functions: 120 l/min at 3.5 bar
Internal Tool Cooling Through the Spindles: 40 l/min at 60 bar
application type: Milling
Location: Germany
machine type: Horizontal Machining Centre
control unit brand: SIEMENS
Control Brand: SIEMENS
Control Model: Sinumerik
Machine Depth: 5450 mm
Max. Tool Weight: 6 kg
Spindle Power: 28 kW