Diener Tetra 100_LF-PC-c citas metālapstrādes iekārtas
PDF
Dalīties
Facebook
WhatsApp
Viber
Telegram
Ieinteresēja sludinājums?
1/23
PDF
Dalīties
Facebook
WhatsApp
Viber
Telegram
Cena:
pēc pieprasījuma
Pieprasīt cenu
Sazināties ar pārdevēju
Tips:
citas metālapstrādes iekārtas
Izlaiduma gads:
2018
Pašmasa:
46 kg
Atrašanās vieta:
Vācija Pullach7123 km no jums
Ievietošanas datums:
vairāk par 1 mēnesi
Numurs pārdevēja katalogā:
994
Apraksts
Gabarītu izmēri:
0,6 m × 1,2 m × 2,1 m
Stāvoklis
Stāvoklis:
lietots
Attālinātā pārbaude
Transportlīdzekļu piegādes pakalpojums
Svarīgi
Šim sludinājumam ir informatīvs raksturs. Precīzas informācijas saņemšanai lūdzam sazināties ar pārdevēju.
Padomi iegādei
Pārdevēja kontakti
Kļūt par pārdevēja abonentu
Nick Breinfalk
Valodas:
vācu, angļu
+49 89 380...
Parādīt
+49 89 38031644
Adrese
Vācija, Bavārija, 82049 , Pullach, Gistlstr. 64
Pārdevēja vietējais laiks:
22:11 (CEST)
Nosūtīt ziņojumu
Pārdevēja kontakti
UCY Machines
Vācija
1 gads Machineryline
5.0
35 atsauksmes
Kļūt par pārdevēja abonentu
+49 89 380...
Parādīt
+49 89 38031644
Uzdot jautājumu pārdevējam
PDF
Dalīties
Facebook
WhatsApp
Viber
Telegram
Pārdodat tehniku?
Dariet to kopā ar mums!
Līdzīgie sludinājumi
cena pēc pieprasījuma
2019
Vācija, Location:frankfurt
Sazināties ar pārdevēju
cena pēc pieprasījuma
2017
Vācija, Bünde
Sazināties ar pārdevēju
cena pēc pieprasījuma
2021
Spriegums
230/380
Vācija, Location:munich
Sazināties ar pārdevēju
cena pēc pieprasījuma
2006
Vācija, Location:nuremberg
Sazināties ar pārdevēju
Marke: Diener
Tetra 100_LF-PC-c
Year of construction
2018
Operating hours
Plasma system: 882
Glanded pump: 498
SURFACE TREATMENT
WITH PLASMA system FROM DIENER ELECTRONIC
Condition
The corrosive gas-resistant system has a special vacuum chamber measuring 400 mm x 625 mm x 400 mm (W x D x H). The vacuum chamber can be fully opened using an automated drawer. A holding frame for substrates is located vertically at the end of the drawer on the system side. It forms the counter electrode to the electrode in the vacuum chamber. Both electrodes are equipped with a cooling water circuit. Substrate holders with openings in the direction of the electrode can be mounted in the holding frame of the drawer. Samples that point towards the electrode through the openings in the holding frame can be treated in the plasma process. The remaining volume of the drawer is in a high vacuum during the process
but is not exposed to the plasma itself. The drawer also has flanges for inserting larger samples into the plasma chamber. Access to the drawer area is monitored by a safety system based on light barriers
There is a leakage at one valve. For this reason
the system could not be put into operation and tested in preparation
Dimensions and weights if known
Plasma system Tetra 100_LF-PC-c
Dimensions (W x D x H) 600 mm x 1200 mm x 2100 mm
Weight: approx. 350 kg
Edwards iH1800 glanded pump
Dimensions: (L (to the housing of the exhaust system) x W x H (to the frequency converter))
986 (1059) mm x 470 mm x 888 (1094) mm
Rittal SK Chiller TopTherm (SK 3334.600)
Dimensions: (W x D x H) 602 mm x 645 mm x 676 mm
Weight / operating weight: 125 kg / 155 kg
Van Der Heijden mobile refrigerator (laboratory chiller) Type: 0000-A-KH-B400-TT-12-54-62
Dimensions: (W x D x H) 360 mm x 470 mm x 590 mm
Basic technical information on the plasma systems
Plasma system type Tetra 100 (Diener electronic Vertriebs GmbH + Co. KG)
corrosive gas version
Connection 400 V / 32 A
Full PC control with remote maintenance option via TeamViewer
Generator type A (80 kHz
0 -1000 W)
Electrode
water-cooled
aluminium
314 mm x 25 mm x 318 mm (W x D x H)
Special vacuum chamber
stainless steel
sight glasses at the rear
with drawer
automated and electrically driven
Dimensions W: 400 mm
D: 625 mm
H: 400 mm (volume: approx. 100 litres)
Water-cooled sample holder
incl. thermometer (integrated in control software)
Dosing for Silan A 174 (incl. heating cartridge
dosing unit
software integration
supply to chamber via separate gas inlet)
Pressure reducer for oxygen
noble gases (incl. inlet and outlet pressure gauges)
Pressure reducer SF6
C4F8
400 V Edwards iH1800 glanded pump
suction capacity 1800 m3/h
Rittal SK Chiller TopTherm (SK 3334.600)
Van Der Heijden mobile cooling unit (laboratory chiller) type: 0000-A-KH-B400-TT-12-54-62
setting range: -5°C - +25°C
Pump capacity max. 28 l/min
Activated charcoal filter KF 40
Software language: German
English
Hungarian
Operating instructions in German
Maintenance status
Last maintenance by manufacturer 17.10.2019 (annual maintenance cycle was cancelled due to subsequent system shutdown)
Spare parts supplied
1 x electrode
water-cooled
titanium
314 mm x 25 mm x 318 mm (W x D x H)
4 x electrode retaining bolts
1 x substrate holder
Find more here
pārādīt kontaktus
Contact us at
pārādīt kontaktus