Картонатор ECONO-PAK

Preis: Contact us for price
Marke: ECONO-PAK
Manufacturer
ECONO-PAK
Type of Machine: Carton Erector
(type FA / FA-V) and
Angle Closer / Carton Closing Machine
(type
WVE-LD)
used together as a top-load carton packaging line
Year of Manufacture
Purchased in 2019
Operating Hours
Carton erector 1931 hours. Carton closing machine 3303 hours
Product Application
Ice cream in pouches
Carton Format and Capacity
Format 1: 293 x 193 x 96 mm
15 cartons per minute
Carton Erector Machine Width
1300 mm
Carton Erector Technique
Tab-lock blank constructions
Carton Erector Max Quantity of Heads
1
Carton Erector Max Capacity per Head
40 cartons per minute
depending on quality
size and design of the carton
Carton Erector Function
A carton feeder with vacuum suckers takes flat carton blanks individually off the magazine and places them centrally onto the lower tool part. A forming head pushes the blanks through the tool chute and the cartons are formed. The erected cartons fall onto a conveyor and are transported out of the erector area. Can be used as a stand-alone unit or integrated into packaging lines. Standard equipment includes a quick-change magazine and fixed-format parts for fast tool change
Tab-Lock Tool Function
The forming head pushes the blank through the forming chute. The carton is formed and the hooks are pulled through the window with the help of a knife. This technique is fast,proper and very reliable
and the formed carton remains flexible and easy to fill
Angle Closer Working Height
Approximately 850 plus or minus 50 mm
machine feet adjustable in height
Angle Closer Conveyor Chains
Attachment pitch of 508 mm
Angle Closer Glue System
Hot glue jet system with 3 glue tubes and 3 application heads
Angle Closer Format Range
125 x 100 x 25 mm to 300 x 250 x 120 mm
Angle Closer Max Capacity
80 cartons per minute
depending on quality
size and packaged good
Angle Closer Dimensions
In-feed 2700 mm
out-feed 2000 mm
Angle Closer Protection Grade
IP54
Angle Closer Function
The carton is fed into the continuously running WVE closer with a pneumatically driven pawl in-feed. The upright standing lid is bent down and glue is applied on the front flap
which is bent and pressed on. The carton is turned by 90 degrees in the angle section and transferred onto the downstream transport conveyor. Glue is applied on the lateral flaps
which are bent and pressed on
completing the closure. The angle section provides a space-saving layout and allows handling of cartons in very long or disproportionate formats. Driven upper belts with lateral press-on rolls facilitate correctly angled closure. A spring system for the press-on rolls allows secure handling of bulged cartons
Power Supply
230/400V
3 AC-N-PE
Pneumatic Data
6 bar continuously
free of oil and water
Find more here
показать контакты
Contact us at
показать контакты